A novel packaging approach for RF MEMS switching functions on alumina substrate

This paper reports the design of a hermetic-compatible wafer-scale package for RF MEMS based components. The presented packaging concept consists in encapsulating the whole RF device or subsystem instead of encapsulating each MEMS component separately, which will reduce the device size and cost. This approach is based on the MEMS fabrication technology on ceramic substrate and the use of laser drilled vias hole techniques to realize full metallized vias in alumina substrates. These vias holes will allow a low loss RF signal transmission inside the package without breaking its hermeticity. Hence, several packaged switching networks prototypes, based on ohmic contact MEMS switches, have been designed following this approach and the packaging electromagnetic impact on these components has been especially studied to result on good performance devices.     

On the relationship between snow grain morphology and in-situ near infrared calibrated reflectance photographs

Seasonal and permanent snow cover a significant portion of our planet, and its impact on climate is significant. Through specific thermophysical properties, snow controls radiative and turbulent fluxes between the ground and the atmosphere, but many aspects of the energy balance are poorly understood due to lingering uncertainties regarding snow properties, such as grain size in particular. Rapid and accurate measurement method has yet to be developed given the reality of field and laboratory logistical constraints, and the sensitivity of snow to any sort of manipulation.In this paper, we investigate the relationship between snow grain morphology parameters measured from visible (traditional) snow grain photography and optical diameter estimated from Near-InfraRed (NIR) reflectance photographs of snow walls. A total of 51 snowpits were analyzed during our International Polar Year field campaign across a 1000 km South-to-North transect over Eastern Canada. We compared the NIR measurements with the theoretical snow albedo model of Kokhanovsky and Zege (2004). Results show the large difference between the snow specific surface area (SSA) of snow grains derived from snow albedo model and the geometrical (visual) diameter. From three different snow grain classes which can be distinguished from traditional photography, linkages can be made with shape factors required in the optical model in order to retrieve optical grain size from NIR photography.     

Accuracy of Fabry-Perot method of semiconductor laser gain measurement

The Fabry?Perot (FP) method of semiconductor laser gain measurement, first proposed by Hakki and Paoli (1975), is widely used. It is based on the measurement of the FP resonances excited by spontaneous emission. Its validity rests on the assumption that a single mode is significant. We show, using a simplified laser model, that this assumption is valid only when the power mirror reflectivity is very small, or near the laser oscillating frequency. For example, the error is in the order of 20% when the power facet reflectivities are equal to 37% and the modal gain is unity. These results apply to both index-guided and gain-guided lasers.     

A compact model of MOSFET mismatch for circuit design

This paper presents a compact model for MOS transistor mismatch. The mismatch model uses the carrier number fluctuation theory to account for the effects of local doping fluctuations along with an accurate and compact dc MOSFET model. The resulting matching model is valid for any operation condition, from weak to strong inversion, from the linear to the saturation region, and allows the assessment of mismatch from process and geometric parameters. Experimental results from a set of transistors integrated on a 0.35 /spl mu/m technology confirm the accuracy of our mismatch model under various bias conditions.     

Failure and scaling properties of a softening interface connected to an elastic block

The damage growth in a softening interface connected to an elastic block is analysed. The elastic block, assumed to be infinite, is modelled as a two-dimensional continuum and the interface is one-dimensional with a constitutive response which follows a scalar damage model. The solution technique is based on the equilibrium of the interfacial forces resulting from the deformation of the elastic block and from the interface constitutive response. The interface failure process is compared to that of a hierarchical model which was obtained analytically (Delaplace et al., 1998). The two are found to be similar, without an internal length scaling the distribution of damage at the inception of macro-cracking. Finally, scale effects on the occurrence of bifurcation and instability are considered. It is shown that bifurcation may occur prior to or after the limit point under displacement control, depending on the elastic block height or stiffness. This revised version was published online in July 2006 with corrections to the Cover Date.     

Simulated annealing for maximum a posteriori parameter estimationof hidden Markov models

Hidden Markov models are mixture models in which the populations from one observation to the next are selected according to an unobserved finite state-space Markov chain. Given a realization of the observation process, our aim is to estimate both the parameters of the Markov chain and of the mixture model in a Bayesian framework. We present an original simulated annealing algorithm which, in the same way as the EM (expectation-maximization) algorithm, relies on data augmentation, and is based on stochastic simulation of the hidden Markov chain. This algorithm is shown to converge toward the set of maximum a posteriori (MAP) parameters under suitable regularity conditions     

Experimental characterization of the chaotic dynamics of cohesionless particles: application to a V-blender

So far, most of the investigations of the dynamics of granular material in blenders have been done in 2D tumblers due to the current lack of accurate measurement methods for the investigation of complex 3D flows. However, recent advances in the field of non-intrusive methods have paved the way to the characterization of the chaotic dynamics in 3D blenders. This work aims to present such an analysis in the case of a V-blender using radioactive particle tracking (RPT). Special attention is given to the chaotic properties of mixing by performing a time-series analysis of the position of a single tracer in motion in this blender. An original investigation of the mixing properties is also presented. More generally, this work shows that the mixing properties of a blender can be characterized by using tools of dynamical systems theory through a time-series analysis of data obtained from non-intrusive measurements.     

Extraction of Finite Element Basis Functions From the Cellular Topology of Meshes

This paper is devoted to the presentation of a simple but powerful topological approach for the computation of basis functions involved in the expression of finite element interpolants. It deals with the so-called nodal and edge elements but similar considerations can be made for the construction of facet ones. All standard cells are treated including pyramids.     

Canadian Total Diet Study in 1998: pesticide levels in foods from Whitehorse, Yukon, Canada, and corresponding dietary intake estimates.

The Canadian Total Diet Study is a national survey to determine the level of chemical contaminants in the Canadian food supply. Food samples were collected from Whitehorse, Yukon, supermarkets as part of the study in 1998. Whitehorse was chosen as a sampling centre, despite its small population (n = 19,000), to determine if residue levels were different in foods available in northern communities relative to levels observed in previous studies in the more populated south. Foods were prepared as for consumption before pesticide residue analysis. Residue levels observed in most foods were similar to levels observed in samples from previous surveys from southern Canadian cities. Malathion and DDE (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene), a transformation product of DDT (1,1,1-trichloro-2,2-bis(p-chlorophenyl(ethane), were the two most frequently detected compounds (26.4 and 25.8%, respectively). The majority of pesticides, however, had a detection frequency of < 5%. In general, pesticides in food composites were well below maximum residue limits established in the Canadian Food and Drug Regulations. Chlorpropham and captan had the highest dietary intakes (2.16 and 1.94 micrograms (kg body weight-day)-1, respectively), based on the results from Whitehorse. No dietary intakes above the acceptable daily intakes, however, were observed for any of the 39 pesticides investigated in any age-sex category, where an acceptable daily intake has been proposed.